Filter
Top Products
10 StreetPilot 2720 Owner’s Manual
VIEWING THE MAP AND OTHER PAGES
GPS Info
The GPS Info page displays the GPS receiver status, including
current satellite coverage, receiver status, and position accuracy.
To access this page, press the MENU key > Tools > GPS Info.
From the map, you can touch the signal strength bars while the
receiver is establishing a fix to view the GPS Info page.
Sky view
Satellite signal
strength bars
The sky view provides an overhead view of each satellite
position relative to your unit’s last known location. The outer
circle represents the horizon. The inner circle represents an
elevation of 45° above the horizon. Any satellite depicted near
the center is directly overhead.
A signal strength bar appears for each satellite in view. A hollow
bar indicates the GPS receiver has found the satellite and is
collecting data. A solid bar indicates the GPS receiver has
collected the necessary data, and the satellite is ready for use.
GPS Settings
Press the MENU key. Then touch Tools > GPS Info > GPS
Settings. You can also access the GPS Settings by touching the
GPS Settings button on the GPS Info page.
Use Indoors—touch Yes to turn the GPS receiver off and use the
unit indoors.
Set Position—if the GPS receiver has not established a fix on
your location, you can enter your current location. From the GPS
Settings page, touch Set Position. Select your location using the
map and touch OK.