Filter
Top Products
GPSMAP 60Cx Owner’s Manual 49
MAIN PAGES >
Compass Page Options
Use the options menu to customize the Compass
Page. With the Compass Page open, press MENU. To
select an option, highlight it, and press ENTER.
Compass Page
Options Menu
The following options are available:
Stop (Resume) Navigation—turns active navigation
for a route or a Go To on or off.
Recalculate— recalculates to path to a destination.
Course (Bearing) Pointer—toggles between the
course arrow and the bearing pointer.
Data Fields—allows you to select the number of data
fields that appear on the Compass Page.
Change Data Fields—allows you to select the type
of data you want to show in the data fields. See page
80 for descriptions of each option.
Restore Defaults—
returns to the factory settings.
Using the Course Pointer or Bearing
Pointer
The Bearing Pointer and Course Pointer work
independently of each other. One indicates the
direction to your destination, and the other indicates
your relationship to a course line leading to the
destination.
If the Bearing Pointer arrow is pointing straight
up, for example, you are going directly to your
destination. If it points any direction other than up,
turn toward that direction until the arrow is pointing
up and then continue in that direction. The Bearing
Pointer always points to the destination, regardless
of the direction you are moving. Most efficient if you
must move around obstacles (lakes, private property,
etc.) in your path.