Filter
Top Products
Standard Terminal Arrival Routes (STARs) used in the GNC 300 are selected and
activated with the same procedures as SIDs. Available STARs may be selected for the
destination airport at any time in the active route as long as the destination airport is
the last waypoint in the active route or the direct-to waypoint. Activating a STAR will
modify the sequence of waypoints in Route 0. If you’d like to save the contents of
Route 0, be sure to copy it to an empty storage route first.
To select and activate a STAR...
1. Press
R
and rotate
O
until the STAR select page appears.
2. Press
C
and rotate
O
until the desired STAR flashes.
3. Press
E
. The STAR waypoints will be inserted in the route.
If a STAR has more than one transition or runway, the STAR select page will
display the transitions and/or runway designations available.
To select a transition...
1. Rotate
O
until the desired transition flashes and press
E
.
To select a runway...
1. Rotate
O
until the runway designation flashes and press
E
.
92
APPROACH NAVI-
GATION
Selecting &
SECTION
6
APPROACH NAV
Selecting &
Activating STARs
Selecting a STAR transition.
Selecting a STAR.
300 7/14/98 8:50 AM Page 92