Filter
Top Products
The SID select page also allows you to review all the available SIDs for the depar-
ture airport and select, delete or change the active SID.
To replace/delete the active SID...
1. Press
R
and rotate
O
until the SID select page appears.
2. Press
C
twice. The active SID (denoted by an asterisk) will flash.
3. To replace the active SID with another available SID, rotate
O
to highlight the desired
SID. Complete the selection by pressing
E
.
4. To delete the active SID, press
\
, followed by
E
. The SID waypoints will be
removed from the active route.
SIDs can also be selected and deleted from storage routes through the Route
Catalog page.
To select a SID from the route catalog page...
1. Display the desired route on the route catalog page.
2. Select ‘sid?’ in the route operations field and press
E
.
3. Select the desired SID and transitions.
4. The SID waypoints will be inserted into the route and the route review page
will be displayed.
To delete a SID from the route catalog page...
1. Display the desired route on the route catalog page.
2. Select ‘sid?’ in the route operations field and press
E
.
3. Rotate
O
to highlight the selected SID (denoted by an asterisk). Press
\
, then
E
.
91
APPROACH NAVI-
GATION
Selecting &
SIDs may be saved with any stored route.
The SID select page allows you to select a new
SID on the fly.
SECTION
6
APPROACH NAV
Selecting &
Deleting SIDs
300 7/14/98 8:50 AM Page 91