Filter
Top Products
The Jeppesen database used in the GNC 300 features Standard Terminal Arrival
Routes (STARs) and Standard Instrument Departures (SIDs) that may be placed into
any active or stored route.
Available SIDs may be selected for the departure airport at any time in the active
route as long as the departure airport is the first route waypoint and the route con-
tains more than one waypoint. SIDs may be selected for the nearest airport when the
first route waypoint is not an airport or the route contains less than two waypoints.
Activating a SID will modify the waypoint sequence of Route 0. If you’d like to save
the contents of Route 0, be sure to copy it to an empty storage route first.
To select and activate a SID...
1. Press
R
and rotate
O
until the SID select page appears.
2. With the flashing cursor inactive, rotate
K
until the desired SID name appears.
3. Press
C
twice and rotate
O
until the SID name flashes.
4. Press
E
. The SID waypoints will be inserted in the route.
If a SID has more than one runway or transition, the SID select page will display
the available runway designations and/or transitions.
To select a transition...
1. Rotate
O
until the transition name flashes and press
E
.
To select a runway...
1. Rotate
O
until the runway designation name flashes and press
E
.
90
APPROACH NAVI-
GATION
Selecting &
SECTION
6
APPROACH NAV
Selecting &
Activating SIDs
Selecting a SID transition.
Selecting a SID.
300 7/14/98 8:50 AM Page 90