Filter
Top Products
75
eTrex Legend C
Appendix
This chart is provided to help you determine the time offset settings
for your current location if it is not in one of the time zones listed on
the Time Setup Page. To change the UTC Offset, access the Main Menu,
then Setup and then open the Time Setup Page. Highlight the Time Zone
field and press the ENTER to display the list of time zones. If the desired
zone is not displayed, select “Other.” Highlight the UTC Offset field and
press ENTER to enter the appropriate offset value from the chart below.
To determine your longitudinal zone, press and hold the ENTER key
and observe the longitude value in the Mark Waypoint Location field. It
should fall within the sets of values on the chart. Press the QUIT key to
avoid marking a waypoint.
Longitudinal Zone Offset
W180.0° to W172.5° -12.00
W172.5° to W157.5° -11.00
W157.5° to W142.5° -10.00
W142.5° to W127.5° -09.00
W127.5° to W112.5° -08.00
W112.5° to W097.5° -07.00
W097.5° to W082.5° -06.00
W082.5° to W067.5° -05.00
W067.5° to W052.5° -04.00
W052.5° to W037.5° -03.00
W037.5° to W022.5° -02.00
W022.5° to W007.5° -01.00
W007.5° to E007.5° -00.00
UTC Offset Chart
Longitudinal Zone Offset
E007.5° to E022.5° +01.00
E022.5° to E037.5° +02.00
E052.5° to E067.5° +03.00
E067.5° to E082.5° +04.00
E082.5° to E097.5° +05.00
E097.5° to E112.5° +06.00
E112.5° to E122.5° +07.00
E122.5° to E127.5° +08.00
E127.5° to E142.5° +09.00
E142.5° to E157.5° +10.00
E157.5° to E172.5° +11.00
E172.5° to E180.5° +12.00
eTrex Legend C Owner's Manual Text.indd 75 8/12/2004, 9:25:43 AM