Filter
Top Products
7
eTrex Legend C
Status Bar
Battery Power
Auxiliary Power
Acquiring Satel-
2-Dimension Navigation
3-Dimension Navigation
Alarm is Set
USB is Connected
Getting Started
The Main Page Features
Status Bar, Backlighting and On-Screen Messages
When you press and release the POWER key, the Backlight Bright-
ness Adjustment Slider and a Status Bar with time and date displays
current status information for several unit features.
• Power to the unit is provided either by the batteries or from
an auxiliary source (DC Adapter). The Battery Power icon
displays the remaining power as the battery becomes depleted.
• Satellite signal status is shown when searching for (acquiring)
satellites, when a two-dimensional fi x is attained, and when four
or more satellites have been received (three dimensional fi x).
• The Alarm Clock icon displays whenever the Alarm is
set.
• The USB cable connection icon displays when the unit is in com-
munication with a PC Universal Serial Bus.
You can adjust the backlight level by pressing the POWER key and
releasing it. Then tap the POWER key or ROCKER key Up or Down
to cycle through the levels of backlight adjustment. See page 46 for
information on changing the display colors and backlight timeout and
brightness levels. Backlighting is Off when you power up the unit. When
On, it uses a signifi cant amount of battery power.
Whenever a signifi cant event in the operation of the unit occurs,
an on-screen message appears to advise you of the occurrence. In each
case, the condition is described and often a remedy provided. Press the
ENTER key to acknowledge the message and close the window.
On-Screen Messages
Backlight Adjustment
Slider
(Brightnesses varies
according to battery
power level.)
eTrex Legend C Owner's Manual Text.indd 7 8/12/2004, 9:23:41 AM