Filter
Top Products
nüvi 765 Owner’s Manual 53
Appendix
Mounting on Your
Dashboard
Use the enclosed mounting disk to
mount your unit to the dashboard.
CAUTION: The permanent
mounting adhesive is extremely
difcult to remove after it is installed.
1. Clean and dry the dashboard where
you are placing the disk.
2. Remove the backing from the
adhesive on the bottom of the disk.
3. Place the disk on the dashboard.
4. Remove the clear plastic cover from
the top of the disk.
5. Place the suction cup mount on top of
the disk. Flip the lever down (toward
the disk).
Removing the nüvi and
Mount
To remove the nüvi from the cradle,
press the button on the bottom of the
cradle up, and tilt the nüvi forward.
To remove the cradle from the mount,
turn the cradle to the right or left. Apply
pressure until the socket on the cradle
releases the ball on the mount.
To remove the suction cup mount from
the windshield, ip the lever toward you.
Pull the tab on the suction cup toward
you.
Caring for Your nüvi
Your nüvi contains sensitive electronic
components that can be permanently
damaged if exposed to excessive shock
or vibration. To minimize the risk of
damage to your nüvi, avoid dropping
your unit and operating it in high-shock
and high-vibration environments.
Cleaning the Casing
The nüvi is constructed of high-quality
materials and does not require user
maintenance other than cleaning. Clean
the outer casing (not the touchscreen)
using a cloth dampened with a mild