32 Oregon Series Owner’s Manual
Customizing the Oregon
you turn the Oregon on.
—select
(used when moving)
or (used when
stationary, allowing the altimeter to
function as a standard barometer).
—select when the
pressure data is recorded. Touch
to record pressure data every
15 minutes, even when the Oregon
is turned off. Touch
to record data only when
the Oregon is turned on. This can be
useful when you are watching for
pressure fronts.
—select the elevation plot
type:
• —records
elevation changes over a period
of time.
• —records
elevation changes over a distance.
• —records
barometric pressure over a period
of time.
• —records
ambient pressure changes over a
period of time.
To manually calibrate the
altimeter:
1. Go to a location where you know
the elevation or the barometric
pressure.
2. Touch Setup > Altimeter > Press
To Begin Altimeter Calibration.
3. Touch Yes if you know the
elevation, touch No > Yes if you
know the barometric pressure.
4. Enter the elevation or barometric
pressure, and then touch
.
