Filter
Top Products
Oregon Series Owner’s Manual 25
Customizing the Oregon
To add a new prole:
Touch Setup > Proles >
<Create New Prole>. This
prole is a copy of your current
prole. The new prole becomes
your current prole.
Using System Setup
Touch > .
—select ,
(Wide Area Augmentation System),
or (GPS off). For
information about WAAS, go to
www.garmin.com/aboutGPS
/waas.html.
—select the text language
on the Oregon. Changing the text
language does not change the
language of user-entered data or map
data, such as street names.
—select the type of
battery you are using.
—turn audible tones or
.
—set the Oregon serial
interface:
• —allows you
to use the Oregon USB port with
most NMEA 0183-compliant
mapping programs by creating a
virtual serial port.
• —Garmin
proprietary format used to
provide PVT protocol data.
• —provides
standard NMEA 0183 output and
input.
• —provides simple
ASCII text output of location and
velocity information.
• —receive differential
corrections from a RTCM
beacon.