Filter
Top Products
Oregon Series Owner’s Manual 31
Customizing the Oregon
compass:
• —sets
the Compass page reading to
directional letters (N, S, E, W).
• —sets the
Compass page reading to degrees
(0°–359°).
• —sets the Compass page
reading to mils (0 mils–1000
mils).
—select the north
reference of the compass:
• —sets true north as the
heading reference.
• —automatically sets
the magnetic declination for your
location.
• —sets grid north as the
heading reference (0°).
• —allows you to set the
magnetic variation value.
(depending on
your unit)—select to show
the Bearing Pointer, which indicates
the direction to your destination.
Touch to select the Course
Pointer, which indicates your
relationship to a course line leading
to the destination (page 11).
—select toswitch
from an electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time. Select to turn the
electronic compass off and use the
GPS compass.
—calibrate the compass
(page 10).
Altimeter Setup
Touch > .
—allow the
altimeter to self-calibrate each time