Filter
Top Products
Av. Kit Install. Manual
190-00004-00 Rev. G
Page 8
SECTION 3 INSTALLATION PROCEDURE
3.1 INSTALLATION KIT CONTENTS
One of the following two installation kits is required for aircraft installation, depending
on the type of antenna used.
The GPS 100 Aviation Installation Kit (010-10002-00) consists of the following parts:
P/N DESCRIPTION QTY
011-00013-00 BLADE ANTENNA SUBASSEMBLY 1
011-00014-00 RACK SUBASSEMBLY 1
115-00015-00 BACKING PLATE 1
117-00001-00 EJECTOR PIN 4
161-00024-00 PLACARD, INSTRUMENT PANEL 1
190-00004-00 INSTALLATION MANUAL (THIS MANUAL) 1
211-20001-00 #8-32 SS, PH, FLAT HEAD SCREW 4
253-00002-00 ANTENNA GASKET 1
320-00003-00 CABLE ASSY, COAX 1
330-00017-00 CONNECTOR, BNC, MALE, CLAMP 1
330-00024-00 CONNECTOR, 15 PIN DSUB, FEMALE 1
The GPS 100 Low Profile Aviation Installation Kit (010-10008-00) consists of the
following parts:
P/N DESCRIPTION QTY
011-00042-00 LOW PROFILE ANTENNA SUBASSEMBLY 1
011-00014-00 RACK SUBASSEMBLY 1
115-00031-00 BACKING PLATE 1
117-00001-00 EJECTOR PIN 4
161-00024-00 PLACARD, INSTRUMENT PANEL 1
190-00004-00 INSTALLATION MANUAL (THIS MANUAL) 1
210-10004-09 NUT, SELF-LOCKING, #8-32 4
253-00002-00 ANTENNA GASKET 1
320-00003-00 CABLE ASSY, COAX 1
330-00017-00 CONNECTOR, BNC, MALE, CLAMP 1
330-00024-00 CONNECTOR, 15 PIN DSUB, FEMALE 1
The following equipment is required for installation but is not included in the
installation kit:
#6-32 Flat Head Screw (4 ea.) #6-32 Self-locking Nut (4 ea.)