Furuno GP-330B GPS Receiver User Manual


 
9-52 Ashihara-cho, Nishinomiya, 662-8580, Japan
Tel: +81 (798) 65-2111 Fax: +81 (798) 65-4200
www.furuno.co.jp
Publication No. DOC-986
Declaration of Conformity
We FURUNO ELECTRIC CO., LTD.
-----------------------------------------------------------------------------------------------------------------------------------------------
(Manufacturer)
9-52 Ashihara-Cho, Nishinomiya City, 662-8580, Hyogo, Japan
-----------------------------------------------------------------------------------------------------------------------------------------------
(Address)
declare under our sole responsibility that the product
GPS receiver type: GP-330B*
-----------------------------------------------------------------------------------------------------------------------------------------------
(Model name, type number)
*: GP-330B is supplied by AIRMAR technology Corporation on an OEM basis and is mechanically and electronically identic
al to their G2183.
is in conformity with the essential requirements as described in Article 10.3 and Annex II of the Directive
1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and
telecommunications terminal equipment (R&TTE Directive) and satisfies all the technical regulations
applicable to the product within this Directive
IEC 60945 Fourth edition: 2002-08 Sub-clauses 9.2, 9.3, 10.3, 10.4, 10.5, 10.8, 10.9 and 12.1
IEC 60950-1 First edition: 2001-10
Draft EN 300 440-1 V1.4.1 Sub-clause 8.3
-----------------------------------------------------------------------------------------------------------------------------------------------
(title and/or number and date of issue of the standard(s) or other normative document(s))
For assessment, see
Declaration of conformity of September 19, 2007 issued by AIRMAR Technology Corporation, the USA
EMC TEST REPORT 3130244BOX-001 of September 12, 2007 prepared by Intertek – ETL SEMKO, the
USA
Safety Test Report FLI 12-08-016 of 7 March 2008 and Test Report FLI 12-08-009 of 25 February 2008
prepared by Furuno Labotech International Co., Ltd.
Nishinomiya City, Japan
March 19, 2008
------------------------------------------------------
(Place and date of issue)
On behalf of Furuno Electric Co., Ltd.
Hiroaki Komatsu
Manager,
International Rules and Regulations
----------------------------------------------------------------------------------
(name and signature or equivalent marking of authorized person)