Furuno GP-3000 GPS Receiver User Manual


 
13
GP-3300
Entering antenna height
1. Press [] to place cursor on PAGE CHANGE (TO GPS INI-
TIAL SETTINGS).
8 GPS INITIAL SETTINGS
PAGE CHANGE (TO INITIAL SETTINGS)
POSITION FIXING MODE = 2D 3D 2D/3D
GEODETIC DATUM = WGS-84 WGS-72 TOKYO NAD
EURO AUST MISC (007)
HDOP THRESHOLD = 20 (2~99)
TIME DIFFERENCE = 09:00
LATITUDE = 34° 00. 000’ N
LONGITUDE = 135° 00. 000’ E
DELTA LATITUDE = 00. 000’ N
DELTA LONGITUDE = 00. 000’ E
SMOOTHING = 00~00 L/L-SPD (0~99)
ANTENNA HEIGHT = 005 M
COLD START = NO YES
CST SATELLITE NO. = 07
MIN. ELEVATION ANGLE = 05° (5~9)
DESELECT SAT NO. = – –
D.GPS MODE = ON OFF
RTCM VER = 1.0 2.0
BYTE FORM = 8-6 8-8
FIRST BIT = MSB LSB
PARITY BIT = EVEN ODD NONE
STOP BIT = 1 2
BIT RATE = 7 8
BAUD RATES = 300 600 1200
2400 4800 9600
: SELECT ITEM
: SELECT PARAMETER
PROGRAM NO. : 48501050xx
Figure 9 GPS INITIAL SETTINGS menu
2. Press [] to select ANTENNA HEIGHT.
3. Enter antenna height above the waterline.
If there is no DPGS beacon receiver installed, press [ENT] fol-
lowed by [MENU] to finish.