Filter
Top Products
12
Navigator selection
Position information, which is used to plot ship’s track, can be
fed from the internal GPS receiver (GP-3300 only) or an exter-
nal navigator. Select one as follows.
3. For the GP-3300, if you are going to use the internal GPS
receiver, simply confirm that INTERNAL NAV is set to ON.
4. Press [↓] to select EXTERNAL NAV.
5. Select navigator; GPS, Loran C, Loran A, Decca, or Dead
Reckoning.
I/O data format
If position data is fed from an external navigator, select the
output format of the navigator as follows.
6. Select I/O DATA FORMAT.
7. Select I/O data format of navigator connected.
Note 1:
Input and output cannot be selected independently.
Note 2:
I/O data talker (GP) cannot be changed.
Time and date
8. Select DATE.
9. Enter year in four digits and month and day in two each.
Enter leading zeroes in case of single digit month or day.
10. Select TIME.
11. Enter UTC time.
For the GD-3000, press [ENT] followed by [MENU] to finish.
For the GP-3300, go to the next page.