Filter
Top Products
10. VIDEO SOUNDER OPERATION
10-9
10.2.2 Types of automatic sounder mode
Two types of automatic sounder modes are available: CRUISE and FISH.
CRUISE is for tracking the bottom, and FISH is for searching fish schools.
CRUISE uses a higher clutter rejection setting than FISH therefore it is not
recommended for fish detection – weak fish echoes may be erased by the clutter
suppression circuit.
10.2.3 How to enable automatic sounder operation
Using the soft key
1. Press the AUTO soft key to show the AUTO window.
MANUAL
FISH
CRUISE
Auto window
2. Rotate the [ENTER] knob to choose FISH or CRUISE as appropriate, and
then push the [ENTER] knob.
Through the menu
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose SOUNDER and then push the [ENTER]
knob to show the SOUNDER menu.
3. Rotate the [ENTER] knob to choose AUTO MODE PRESET and then push
the [ENTER] knob.
The AUTO MODE PRESET window appears.
MANUAL
FISH
CRUISE
Auto window
4. Rotate the [ENTER] knob to choose FISH or CRUISE as appropriate and
then push the [ENTER] knob.
5. Press the [MENU] key to close the menu.