Filter
Top Products
-1.33-
1.34.2 Activating/deactivating a function
Press the [FUNCTION] key. Each time the key is pressed a preset function the preset functions
enabled on the FUNC menu are turned on or off cyclically.
You may enable/disable preset functions from the menu as follows:
1. Press the [MENU] key followed by the [6] key twice to display the FUNC menu.
2. Press the [1], [2] or [3] key to enable or disable a preset function as appropriate.
3. Press the [ENTER/SELECT] key to register your selection and the [MENU] key to close the
menu.
The picture setup options assignable to any of the function keys are shown in the table below:
LABEL DESCRIPTION LABEL DESCRIPTION
BUOY Optimum setting for detecting
navigation buoys, small vessels
and other small surface objects
RAIN Setting for radar operation in
rainy condition
OCEAN Transoceanic voyage using a
range scale of 12 nm or larger
LONG Optimum setting for long range
detection using a range scale of
6 nm or larger
COAST For coastal navigation using a
range of 12 nm or less
HARBOR Optimum setting for short range
navigation in a harbor area
using a range scale of 1.5 nm or
less
ROUGH
SEA
Optimum setting for rough
weather or heavy rain
FLOAT Optimum setting for detecting
the floating buoys of seine net
Function keys default settings are as below:
LABEL 3 ECHO
AVG
Echo
Average
4 INT REJ
Interference
rejector
5 ECHO
STRETCH
Echo Stretch
6 NOISE
REJ
Noise
Rejector
7
ENHANCE
Enhance
Video
8
CONTRAST
Video
Contrast
9 A/C AUTO
A/C Auto
COAST 0.5 1 OFF OFF OFF 2 OFF
OCEAN 0.5 1 OFF OFF OFF 2 OFF
R-SEA 1 1 OFF OFF OFF 2 OFF
FLT 1 1 OFF OFF OFF 2 ON
BY 3 1 2 ON OFF 3 OFF
HBR 0.5 1 OFF OFF OFF 2 OFF
L 3 1 1 ON OFF 3 OFF
RAIN 0.5 1 OFF OFF OFF 2 OFF