Filter
Top Products
1-8
How to attach panel hook and panel cover
Note: If you need to remove the monitor unit from the console, remove the four panel covers with
your fingernail and use two panel hooks supplied as accessories to lift the monitor unit.
Desktop mounting
Use the optional desktop mouting kit (Type: FP03-09820, Code No.: 008-535-560) to mount the
monitor unit on a desktop.
1. Assemble two hangers and hanger stay with two hex bolts (M10×30), flat washers and spring
washers and cover each hex bolt with hole plug.
2. Fix the above assembly to the mounting location with four hex bolts (M12, dockyard supply).
3. Fasten the monitor unit to the mounting hanger assembly with four hex bolts (M6×25, supplied).
4. Cover each hex bolt with a panel cover (4 pcs.).
5. Cover fixing holes for hand grips with snap buttons (4 pcs).
Contents of desktop mounting kit FP03-0982
0
Name Type Code No. Qty
Hanger L 03-163-1111 100-305-141 1
Hanger R 03-163-1112 100-305-181 1
Hanger stay 03-163-1113 100-305-191 1
Hole plug CP-30-HP-13 000-147-143 2
Snap button KB-13, Black 000-570-276-10 4
Hex. bolt
M6
×25
000-802-771 4
Hex. bolt
M10
×30
000-802-182 2
Spring washer M10 000-864-261 2
Flat washer M10 000-864-131 2
Panel hook
Panel cov
er
Fixing screw