Ford 2010 F-250 Automobile User Manual


 
8. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until
the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION
COMPLETED. It will take up to five circles to complete calibration.
9. The compass is now calibrated.
Note: If the RESET button is pressed or three minutes has expired, the
display will go back to the INFO menu and will show CAL instead of the
compass heading until the compass is calibrated.
LANGUAGE = ENGLISH / SPANISH / FRENCH
Allows you to choose which language the message center will display in.
Selectable languages are English, Spanish, or French.
Waiting four seconds or pressing the RESET button cycles the message
center through each of the language choices.
Press and hold the RESET button for two seconds to set the language
choice.
System warnings
System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.
In the event of a multiple warning situation, the message center will
cycle the display to show all warnings by displaying each one for four
seconds.
The message center will display the last selected feature if there are no
more warning messages.
Types of messages and warnings:
Some messages will appear briefly to inform you of something you
may need to take action on or be informed of.
Some messages will appear once and then again when the vehicle is
restarted.
Some messages will reappear after clearing or being reset if a problem
or condition is still present and needs your attention.
Some messages can be acknowledged and reset by pressing RESET.
This allows you to use the full message center functionality by clearing
the message.
PARK BRAKE ENGAGED Displayed when the parking brake is
applied (or not fully released).
CHECK BRAKE SYSTEM Displayed when a fault has been detected
by the ABS module.
Instrument Cluster
38
2010 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA (fus)