Filter
Top Products
3-6 Installation Considerations
Section 3: Installation Considerations
Siren and Grille Lights
The engine cooling system relies on correct airflow through the radiator to keep the engine at its
correct operating temperature. When adding sirens and grille lights to a vehicle, make sure this
airflow is not obstructed. Reduced airflow could put additional strain on the cooling system and
shorten the operational life of related components. During the installation process, keep the
placement of components away from the grille area of the vehicle.
Partition Installation Guidelines
WARNING: Side curtain deployment drawing are shown in Section 5: Reference
Information. Review the deployment drawings before installing a partition or other
equipment to make sure that there is no deployment interference. Failure to follow these
instructions may result in personal injury.
WARNING: The partition and the installation hardware of the partition must not
interfere with the correct operation of the safety belt, safety belt retractor, side impact
sensor and the safety belt height adjusters. Failure to follow these instructions may result
in personal injury.
WARNING: Installation of prisoner partitions may increase the risk of injury to front
seat occupants if the vehicle is impacted from a high-speed rear-end collision. This risk
should be balanced by the law enforcement agency against the risk of injury to the officer
associated with prisoner transportation. Failure to follow these instructions may result in
personal injury.
2010 Expedition SSV Modifiers Guide, 07/2009