Filter
Top Products
9
X3419pr-0920
ASSEMBLY
• Place a
3
/8" (0,95 cm) -16 lock nut (rounded side out)
onto a front axle.
IMPORTANT: Tighten the lock nut firmly using the closed
end of the assembly tool.
• Repeat this procedure to fasten the other front wheel
assembly with the other
3
/8" (0,95 cm) -16 lock nut.
3
/8" (0,95 cm) -16 Lock Nut
Assembly Tool
• Align the slot in a hubcap with the rib in the wheel cover.
"Snap" a hubcap into the center of each wheel cover.
Wheel
Cover
Hubcap
4
5
• Fit the front end onto the vehicle.
• Insert the tabs on the back edge of the front end into the
slots in the vehicle.
Front End
• Insert two #8 x
3
/4
"
(1,9 cm) screws through the front end
and into the vehicle. Tighten the screws.
#8 x
3
/4
"
(1,9 cm) Screws
6
7