Filter
Top Products
8
T6138pr-0920
Assembly
Motor
Harness
Connector
Wire
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle's unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
WARNING
• Position the dash on the vehicle.
• Make sure the motor harness connector wire is
through the groove in the dash.
• Insert five #10 x ¾
"
screws into the dash tabs
and tighten.
FRONT VIEW
1
19
7
16
19
13
12
DASH VIEW
2
• Place the labels exactly as shown in the illus-tration
and avoid repositioning a label once it has
been applied.
3
4
Dash
Key Assembly
• Insert and “snap” the key assembly into the opening
in the dash, as shown.
• Place a dash cap to the side of the dash.
• Insert three #10 x
3
/4” screws and tighten.
• Repeat this procedure to assemble the other dash cap
to the dash.