Filter
Top Products
13
T6138pr-0920
ASSEMBLY
SIDE VIEW
23
21
• Fit a support to one side of the sport bar.
• Insert a #8- 32 x 1
5
/8
"
screw through the support, the
sport bar and out through the support.
• Fit a #8 acorn lock nut to the end of the screw.
• While holding the acorn lock nut with an adjustable
wrench or pliers, tighten the screw.
• Repeat this procedure to fasten the other support to the
sport bar.
Sport Bar
Supports
Sport Bar Support
Side
Fender
PULL
UP
PUSH
DOWN
• Fit the sport bar assembly into the holes in the top
side of the vehicle.
• Push down firmly on a sport bar support while
pulling up on the side fender to fit the sport bar into
the vehicle.
• Repeat this procedure on the other side of the vehicle.
• Turn the vehicle on its side.
• Insert two #10 x
3
/
4
" screws into the holes (behind the
rear wheels) in the underside of each rear wheel well,
through the vehicle and into the ends of the sport bar.
Tighten the screws.
• Next, insert two #10 x
3
/
4
" screws
into the holes (in
front of the rear wheels) in the underside of each
wheel well, through the vehicle and into the ends of
the sport bar. Tighten the screws.
BOTTOM VIEW
24
Rear of
Vehicle
22
• Fit the light covers to the sport bar lights.
• Insert a #10 x
3
/4
”
screw into each light cover. Tighten
the screws.
Light
Covers