Filter
Top Products
32
• Insert the fastener end of a short seat belt strap through the
slot near the outer edge of the seat. Make sure the side of the
seat belt with the fastener faces the outer edge of the seat.
• Pull the short seat belt strap completely through the slot until
the last T-loop at the opposite end of the belt catches against
the slot. You will pull one T-loop through the slot.
• Repeat this procedure to assemble the other short seat
belt strap.
• Insert each fastener end of the long seat belt strap through a
slot in the center of the seat. Make sure the fasteners face the
outer edge of the seat.
• Pull each side of the long seat belt strap evenly through
the slots. Make sure to pull each T-loop through a slot.
33
• Insert the two tabs on the front edge of the seat into the slots
in the vehicle.
Short Seat Belts
Slots
Seat
Long Seat Belt
M9780pr-0920
TOP VIEW
34
• Insert two #8 x
3
/4
"
screws into the back of the seat.
Tighten the screws.
Seat
Seat
BACK VIEW
• Lower and fit the side tabs on the hood into the slots on each
side of the front end of the vehicle.
Hood
Tab
Slot
18
ASSEMBLY
F
31