Filter
Top Products
14
ASSEMBLY
F
M9780pr-0920
17
• Insert three #8 x
3
/4
"
screws into each plate and tighten.
18
• Separate the radio connector wires from the motor
harness connector.
• Position the motor harness connector towards the front of the
vehicle and into the battery compartment.
• Position the radio connector wires toward the back of
the vehicle.
Motor Harness
Connector
19
• Open the doors on the vehicle.
• Place the windshield/dash on top of the front end of the vehicle.
• Plug both radio connectors together.
Hint: If the connectors do not fit together, do not force them.
Simply turn one of them over and try again!
Radio
Connectors
Windshield/Dash
20
• Fit the tabs on the windshield/dash into the slots in the front
end of the vehicle.
Windshield/
Dash
Front
Radio
Connector
BACK VIEW
FRONT VIEW