Filter
Top Products
H7332pr-0920
• Press firmly on the front of the cowling to snap the four, front tabs
into the slots in the vehicle. Make sure the side and rear tabs stay
aligned with the slots.
Note: Pull up on the front of the front end of the vehicle while
pressing down on the cowling to make sure the front tabs snap
into the slots.
11
ASSEMBLY
F
H7332pr-0920
7
• Press the tab under the back of the
seat and lift to remove the seat.
• Make sure the motor harness wires are
positioned in the channel to prevent them
from being pinched between the cowling
and vehicle.
TM
Cowling
Shifter Handle
Side Tab
Side Tab
Rear Tab
6
• Fit the rectangular opening in the cowling over the
shifter handle.
• Align the front, side and rear tabs on the cowling with the slots
in the vehicle. DO NOT snap the tabs into the slots.
T
M
PRESS COWLING HERE
To Snap Front Tabs
PULL VEHICLE BODY
UP HERE
To Snap Front Tabs
• Press firmly on each side of the cowling to snap the four side tabs
into the slots in the vehicle. Make sure the rear tab stays aligned
with the slot.
Note: You may need to flex the shifter to the side to fit the cowling
over the high speed lock-out screw.
• Press firmly on the back of the cowling to snap the rear tab into the
slot in the vehicle.
9
PRESS HERE
To Snap Rear Tab
8
Front Tabs
Front Tabs
TM
Motor
Harness
T
M
PRESS HERE
To Snap Side Tabs