Filter
Top Products
H4433pr-0920
12
ASSEMBLY
F
H4433pr-0920
Hood
• Using safety scissors, cut the plastic ties holding the flying disc on
the hood. Dispose of the plastic ties properly.
Note to Retailer: Do not remove the plastic ties.
Plastic Tie
Flying Disc
17
Plastic Tie
16
Hood
Latch
Slot
Hood
Latch
Slot
• Insert a hood latch into one of the slots in the vehicle, near the
hood area.
• Twist the base of the hood latch
1
/
4
turn to secure it in the vehicle.
• Repeat this procedure on the other side of the hood area to attach
the other hood latch to the vehicle.
Grille
Tab
Tab
Slot
Slot
• Fit the lens tabs on the back of a lens assembly into the headlight
slots in the grille.
• Press firmly to
"snap" the lens assembly into the grille.
• Repeat this procedure to "snap" the other lens assembly into
the grille.
15
Front View
Hood
Tabs
• Insert the tabs on the hood into the slots in the front end of
the vehicle.
• Pull the hood forward and lower it closed.
Slot
Slot
18