Fisher-Price H4433 Motorized Toy Car User Manual


 
H4433pr-0920
10
ASSEMBLY
F
H4433pr-0920
6
Dash
Key
Assembly
Insert and “snap” the key assembly into the opening in the dash,
as shown.
7
Wipe the steering column with a paper towel to remove any
excess lubricant.
Turn the vehicle on its side.
Insert the straight end of the steering column up through the hole in
the vehicle floor and out through the hole in the dash.
While holding the steering column in place, turn the vehicle upright.
Steering
Column
Hole
Bottom View
Position the steering wheel so that the large opening and the tab on
the steering wheel stem are both UP.
Fit the steering wheel onto the end of the steering column.
Steering
Wheel
Steering
Column
8
Tab UP
Large Opening UP
Side View
Fit the steering wheel cap into the center of the steering wheel.
Insert two #8 x 1" screws and tighten.
Insert the
5
/
32
" x 1
1
/
2
" pin through the hole in the end of the
steering column.
Lower the steering column so that the pin fits inside the center of
the steering wheel.
9
End of
Steering
Column
5
/
32
" x 1
1
/
2
" Pin
10
Steering
Wheel
Cap