Filter
Top Products
9
• Fit the cowling assembly into the front end of the frame.
Hint: Squeeze the cowling assembly slightly (on each
side) to fit it inside the frame.
• Insert two #8 x
3
/
4
" screws into the front holes in the
cowling. Tighten the screws.
3
•Turn the frame on its side.
• Insert four #8 x
3
/
4
" screws into the holes in the bottom
of the frame and into the cowling assembly. Tighten
the screws.
5
•Turn the frame upright.
• Position the steering tube so that the curve faces the
front end of the frame.
• Fit the ends of of the steering tube into the holes in the
frame on either side of the cowling.
6
Bottom View
Frame
Steering Tube
Curve Faces
Front End
of Frame
Cowling
Assembly
Front of
Frame
• Insert two #8 x
3
/
4
" screws into the frame, as shown.
Tighten the screws.
4
#8 x
3
/
4
"
Screws
#8 x
3
/
4
"
Screws
#8 x
3
/
4
" Screws
Assembly