Filter
Top Products
12
Hint: There is a left and right strut. Locate the L on the
left strut and an R on the right strut.
• Position the left strut so that the L is facing inward.
• At an angle, fit the left strut between the retainers on
the wing.
Hint:There is a left and right flap. Locate the L on the left
flap and an R on the right flap.
•Turn the wing upside down. Fit the flaps to the sides of
the wing.
• Insert two #8 x
3
/
4
" screws into the inside edge of the
wing and each flap. Tighten the screws.
• Fit a cap over each retainer.
• Insert a #8 x
3
/
4
" screw through each cap and tighten.
• Repeat steps 16 and 17 to assemble the right strut and
remaining caps to the wing.
• Fit the wing struts to the back of the seat.
• Insert four #8 x
3
/
4
" screws through the seat and into
each strut. Tighten the screws.
15
17
18
16
Wing
Cap
Cap
Left Strut
Seat
Struts
Retainers
Left Flap
Right Flap
L
#8 x
3
/
4
"
Screws
#8 x
3
/
4
"
Screws
Assembly