Filter
Top Products
13
Assembly
• Fit one of the side tabs on the hood into the slot in the
vehicle body.
• While bending the hood slightly, fit the other side tab into
the corresponding slot on the vehicle body.
Hood
Side
Tab
Side
Tab
Slot
• Fit the tabs on the battery clamp cap into the slots in the
battery clamp unit.
• Press firmly to “snap”the battery clamp cap tabs in the
battery clamp unit slots.
Battery Clamp Cap
Tab
Slot
Battery
Clamp
Unit
Steering
Wheel
Notch
Steering
Wheel
Cap
• Align the notch in the side of the steering wheel cap
with the tab in the center of the steering wheel. Fit the
steering wheel cap into the steering wheel.
•Insert two #8-18 x 1" screws into the steering wheel
cap and tighten the screw with a Phillips screwdriver.
Do not over-tighten.
•Position the steering wheel upright, so that the spokes
form a "Y".
• Fit the steering wheel onto the steering column. Make
sure the neck of the steering wheel fits into the hole in
the dash.
• Fit a cap nut onto the end of the steering column.
•Tap the cap nut with a hammer to secure it on the
end of the steering column.
Hint: You may want the help of another adult to support
the steering column while you tap the cap nut with
the hammer.
Steering
Wheel
Steering
Column
“UP”
Cap
Nut
16
17
18
19