Filter
Top Products
English
13
DISARM VIA PHONE
1. Call 1-410-329-9477 and enter login and password.
2. Select
Arm/Disarm
from the main menu.
3. If you have more than one MOBILELOCK
TM
unit you will be
asked to select the correct one, the correct group or all.
4. Select
Disarm
.
5. Wait for the phone menu to provide confirmation that the unit
has been armed. Do not hang up before this confirmation.
NOTE: If you have chosen to activate the arm and disarm confir-
mation chirps, the MOBILELOCK
TM
unit will beep to indicate the unit
is armed.
DISARM VIA MOBILELOCK
TM
WEBSITE
1. Go online to www.dewalt.com/mobilelock and enter login and
password.
2. Select
Unit Customization.
3. If you have more than one MOBILELOCK
TM
unit, you will be
asked to select the correct one, select a group, or select all.
4. Select
Disarm.
5. Wait for the website to provide confirmation that the unit has
been disarmed.
NOTE: If you have chosen to activate the arm and disarm confir-
mation chirps, the MOBILELOCK
TM
unit will beep to indicate the unit
is armed.
Choosing Sensors
Multiple sensors can be used depending on the application.
TAMPER SENSOR
The tamper sensor is on the back of the MOBILELOCK
TM
unit. It
is used to notify when someone has tampered with the security
system.
IMPORTANT: The tamper sensor will provide notification that the
MOBILELOCK
TM
unit has been removed from the mounting surface
even when the unit is disarmed. The sensor can be deactivated on
the website or phone menu system.
VIBRATION SENSOR
The vibration sensor detects vibration on a metal container or
movement of heavy equipment. The sensitivity setting is
adjustable. The false alarm filter assists in blocking out false alarms
associated with thunder claps, accidental bumping, objects falling
on the equipment or container, etc. The false alarm filter has a high,
low, and off setting.
IMPORTANT: When testing, check for both the strength of the
vibration and the number of times the vibration occurs. The false
alarm filter looks for multiple vibrations over a short period of time
and may require a series of vibrations to trip the sensor.
After an alarm from the vibration sensor, the sensor is turned off for
15 minutes.
DOOR CONTACT SENSOR
The door contact sensor detects the opening of a door. If the door
is open when the MOBILELOCK
TM
unit is armed, an alarm will occur
when the door is closed. After an alarm from the door contact
sensor, the sensor is turned off for 15 minutes. If the door is still
opened after 15 minutes, another alarm will be sent. This will
continue until the MOBILELOCK
TM
unit is disarmed or battery is
depleted.
Place the magnet on the opposite side of the door jam no more
than 3/8" (9.5 mm) from the left side of the MOBILELOCK
TM
unit.
3/8" (9.5 mm)
DS500 E,Sp 8/9/06 11:04 AM Page 13