Filter
Top Products
Page 19 of 44
Catalog #91001, 91003, 91004, 91005, 91007, 91009
Rev. 2/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0282
Speed Channel
The historical graphs can display data vs. time, or data vs. distance traveled. If this feature is desired, a vehicle speed sensor must be
installed and you must tell the system which speed sensor will be used for the distance calculations. A list of all enabled digital inputs
is displayed for selection.
Speed Units
The units that the speed sensor is calibrated in must be entered here so that the distances on the graphs can be configured correctly.
Select a value from the pre-configured list.
Lap Trigger Channel
If a lap beacon or driver controlled pushbutton is used to break a session into laps, then this input box is used to identify the digital
channel number to QwikData. A list of all enabled digital inputs is displayed for selection.
Starting Trigger
One of the handiest features of QwikData is the ability to start logging when a certain action occurs, or a sensor reaches a pre-defined
value (e.g. start logging when RPM > 5000). If automatic start/stop triggers are not used, data logging can be started manually from
the Realtime display screen.
First select whether the trigger is digital or analog by clicking on the appropriate button.