©2003 Edelbrock Corporation
Brochure No. 63-0148
Rev. 2/03
Page 7 of 23
1.4 Performer EFI Kit Bill of Materials
Qty. Description
Nozzle and Nozzle Hardware
1 ea. Nitrous fan spray nozzle
1 ea. Nitrous fan spray nozzle bulkhead body bolt
1 ea. Nitrous fan spray nozzle bulkhead concave nut
Solenoids and Solenoid Hardware
2 ea. Performer nitrous solenoids
1 ea. Solenoid tee 1/8 NPT male x 1/8 NPT female x
1/8 NPT male
1 ea. EFI solenoid mounting bracket
4 ea. Solenoid mounting screws (8 x 32 UNC x 5/16”)
1 ea. 1/8 NPT to 1/8 NPT Union Fitting
1 ea. N2O Filter Fitting, 4AN x 1/8” NPT, Blue
1 ea. 3AN x 1/8” NPT Nitrous Fitting, Blue
1 ea. Microswitch mounting bracket
1 ea. 24” 3AN steel braided hose
5 ea Hose Clamps
1 ea Hose Tee
1 ea 50 PSI Nitrous Pressure Regulator
1 ea 1/8 NPT to Fuel Jet Adapter
1 ea Tube nut and insert
1 ea 1/16 NPT Pipe Tap
3 ft. Vacuum Line
Qty. Description
Jets
2 ea. Jet .032
1 ea Jet .036
Fuel Pressure Safety Switch and Hardware
1 ea. Fuel pressure safety switch
1 ea. 1/8 NPT female -4AN female swivel
1 ea. 1/16 NPT male x 1/8 NPT female
1 ea. 90 deg. 4AN female x 4AN male
Bottle and Bottle Hardware
1 ea. 10-lb., Nitrous Bottle
1 pr. Nitrous Bottle Bracket Set (1 Tall, 1 Short)
1 ea. 660 Bottle Nut and Teflon Washer
1 ea. 14’ Nitrous Feed Line, Bottle to Solenoid
Electrical System Components
2 ea. Electrical Component Packages
(see
“3.0 Electrical System Installation”
section)