Filter
Top Products
11
© 2009 Directed Electronics
Programming options
Programming options control your system’s normal, operational set-
up. Most options do not require additional parts, but some may
require additional labor. All programming options must be set by your
installer.
Programming settings
The following is a list of the program settings that can be set by your
installer.
1. Active or passive arming (automatic arming 30-seconds after
closing the last door).
2. Arming/disarming confirmation chirps on or off.
3. Door Trigger Error Chirp on or off.
4. Ignition-controlled domelight on or off.
5. Panic/Auxiliary Channel: This unit has the ability to control
an optional accessory by pressing the door lock button twice.
If the auxiliary feature is activated and optional accessories
are not installed, the system will not respond to pressing the
lock button twice. In panic mode pressing the lock button
twice will activate panic mode.
6. Auxiliary Output or Delayed Auxiliary Output.
NNoottee::
Factory default setting is shown in
bboolldd
.