Filter
Top Products
16. Cut facia crossbar out according to picture on each
side.
17. Reinstall facia and hardware.
16. Drill 3/8” hole through bottom of bumper, using base-
plate as template. This is located under bumper on
passenger’s side.
17. Slide short nut strip into hole in bumper and use 3/8” x
1” bolt and 3/8” lock washer and tighten bolt.
18. Reinstall ceramic box on driver’s side.
19. Notch plastic shields and reinstall.
20. Cut facia according to picture on each side. Reinstall facia
and hardware.
TOYOTA ECHO
SCION XA