Filter
Top Products
7. Cut plastic side shields even with bottom of bumper on
each side.
8. Slide baseplate up from bottom. On driver’s side, start
two bolts that were removed from tow eye bracket.
9. On passenger’s side, push baseplate up and temporal-
ity clamp in place. Now install short rear brace on
passenger’s side and long rear brace on driver’s side,
using four 3/8” x 1” bolts, four 3/8” lock washers, and
four 3/8” hex nuts. NOTE: Braces attach to bottom
hole in baseplate and frame hole hanging from frame.
Use “ “ blue on all bolts. Do not tighten yet.
8. Remove plastic side shields and set aside for later
reinstallation.
6. Pull facia out at wheel wells and carefully remove facia.
7. On driver’s side, remove two bolts holding tow eye
bracket, these bolts will be reused, bracket will not.
Also, temporarily remove two screws from ceramic box
and let hang.
6. Temporarily remove two screws from ceramic box and
let hang.
R
9. Remove counter balance weight.
TOYOTA ECHO
SCION XA