Filter
Top Products
10. On passenger’s side, drill top hole of baseplate using
3/8” drill bit, using baseplate hole as template. This
hole must line up with hole on inside of box frame.
11. Install 3/8” x 3-1/2” bolt, 3/8” lock washer, and install
through base plate frame, and thread into threaded nut
plate on inside of frame. Do not tighten yet.
10. Remove one bolt in washer tank (washer tank bracket
will need to be notched for clearance of baseplate).
12. Slide baseplate up from bottom. On driver’s side, start
two bolts that were removed from tow eye bracket.
11. On passenger’s side, push baseplate up and temporal-
ity clamp in place. Now install short rear brace on
passenger’s side and long rear brace on driver’s side,
using four 3/8” x 1” bolts, four 3/8” lock washers, and
four 3/8” hex nuts. NOTE: Braces attach to bottom
hole in baseplate and frame hole hanging from frame.
Use “ “ blue on all bolts. Do not tighten yet.
R
TOYOTA ECHO
SCION XA