Dell DCD0 Automobile Accessories User Manual


 
28 Quick Reference Guide
No memory
modules are detected.
If two or more memory modules are
installed, remove the modules
(see "Memory"
in your User’s Guide
),
reinstall one module, and then restart
the computer. If the computer starts
normally, continue to install additional
memory modules (one at a time) until
you have identified a faulty module or
reinstalled all modules without error.
If available, install working memory of
the same type into your computer
(see "Memory"
in your User’s Guide
).
If the problem persists, contact Dell
(see
"Contacting Dell" in your
User’s Guide
).
System board failure
has occurred.
Contact Dell (see "Contacting Dell" in
your User’s Guide).
Memory modules are
detected, but
amemory
configuration or
compatibility
error exists.
Ensure that no special requirements
for memory module/connector
placement exist (see "Memory"
in
your User’s Guide
).
Ensure that the memory you are using
is supported by your computer
(see "Memory"
in your User’s Guide
).
If the problem persists, contact Dell
(see
"Contacting Dell" in your
User’s Guide).
A possible system
board resource and/or
hardware failure has
occurred.
Perform the procedures in "Restoring
Your Operating System"
in your
User’s Guide
.
If the problem persists, contact Dell
(see "Contacting Dell"
in your
User’s Guide
).
Light Pattern Problem Description Suggested Resolution