Daewoo D25S-3(B3.3) Automobile Parts User Manual


 
Diesel Engine Complete Engine
68
Measure the radial and face runout of the flywheel
housing.
Radial Runout
mm in
0.35
MAX
0.014
Face Runout
mm in
0.30
MAX
0.012
Flywheel
W
ARN
I
N
G
This component weighs 23 kg [50 lb] or more. To
avoid personal injury, use a hoist or get
assistance to lift this component.
Install the flywheel, coupling, retaining plate, and six
capscrews. Tighten the capscrews.
Torque Value:
Main Bearing
Step 1
108 N•m [80 ft-lb]
Flywheel
Capscrews
2
191 N•m [141 ft-lb]
Measure the radial and face runout of the flywheel.
Radial Runout
mm in
0.20
MAX
0.0079
Face Runout
mm in
0.15
MAX
0.0059
Camshaft Assembly
NOTE: When installing the camshaft, lightly rotate
the shaft while being careful not to damage
the bushing.
Install the thrust plate, camshaft assembly, and two
capscrews.
Tighten the capscrews through the casting holes in
the camshaft gear.
Torque Value: 19 N•m [14 ft-lb]
00900236
00900187
00900237
00900238