Filter
Top Products
OPTION PROGRAMMING
OPTIONS CHART * = DEFAULT
Option #
Option Description Option Values Button #1
LOCK
Button #2
UNLOCK
1. Tach Learning Tach Reference (Page 10) Learn Tach
2. Autolock with Ignition ON or OFF. ON OFF*
3. Door Lock Pulse Time 0.75 Sec. (Standard) OR
3.0 Sec. (European Vacuum)
3 Sec. 0.75 Sec.*
4. Double Unlock Pulse ON or OFF ON OFF*
5. OEM Interface Remote Start w/Single Pulse or
3 Pulses on Green input wire
3 pulse 1 Pulse*
6. Passive Starter Disable ON or OFF ON OFF*
7. Horn Chirps on remote start ON or OFF ON OFF*
8. Lock During and After
Remote Start Abort
ON or OFF OFF ON*
9. Smart Tachless Reference
Voltage Setting #9
ON or OFF OFF ON*
10. Smart Tachless Reference
Voltage Setting #10
ON or OFF OFF ON*
11. NOT USED NOT USED
12. Yellow/Black Wire (-) (-) IGN output or (-) Anti-Grind Anti-Grind IGN output*
13. Remote Start Engine Run
Time
Button #1 = 12 Min.
Button #2 = 24 Min.
Button #3 = 36 Min.
Button #4 = 48 Min.
12 Min. 24 Min.*
14. Option reset Button #2 Reset ALL to
Default
PROGRAMMABLE OPTIONS:
1. Tach Learning:
The unit will program the Tach signal from the Red/White wire when button 2 is pressed at this option level. See pages 9-
10 Tach Ref/Tach programming.