Filter
Top Products
OPERATION
VALET MODE
To disable alarm functions of the 882 system, turn the Ignition ON and press the override/program button 3
times within 8 seconds. After 8 seconds, the dash LED turns on solid as an indicator that the system is in valet
mode. Repeat this steps to exit VALET mode. The LED will go out, system will chirp (2) times and the light
will flash (2) times when exiting valet mode.
When in VALET mode the siren will still chirp for lock/unlock confirmation even though alarm functions are
disabled. The CS-882 system will chirp 2 times when locking the doors and 3 times when unlocking the
doors.
PANIC MODE (Programmable Option)
To activate your system during an emergency situation or to attract attention to your vehicle, press the Lock
button on your remote 3 times within 5 seconds. This will activate a 30-second alarm trigger. Press any
button on your remote to disarm.
FACTORY TRUNK RELEASE SENSING
If the CS-882 system is installed in a vehicle with trunk pop or hatch release button on the Factory Remote,
there is a special input wire that will prevent the system from triggering if the trunk button on your remote is
pressed while the system is armed.