Filter
Top Products
PROGRAMMABLE OPTIONS
1. Turn the Ignition ON and press the Override/Program button 7 times within 10 seconds.
2. Turn OFF Ignition. LED will flash slowly once per second as and indicator the system is in programming
mode.
3. Within 20 seconds, press the Override/Program button the number of times that corresponds to the feature
list below. The siren will chirp for each button press. DO NOT LOSE COUNT!! If you can hold down the
button for 3 seconds and release you get 2 chirps. A 3-second button press is the same as pressing the
button 10 times.
4. When you get to the desired option number, turn the Ignition from OFF to ON to toggle between the preset
and alternate settings. The siren will chirp once or twice indication which value the feature is at. See Below
for Option numbers, descriptions, and values. Ignition should be left in the OFF position once your have
the correct value.
5. At this time, if you need to change more options, repeat steps 3 & 4 above.
6. To exit programming Mode, Turn Ignition ON and press the Override/Program button once.
OPTIONS CHART
Option #
Option Description PRE-SET Value
(1 chirp)
ALTERNATE
Value
(2 chirps)
1 Flashing Lights ON OFF
6 Siren Chirps ON OFF
8 Passive Arming OFF ON
10 Door Trigger Input Polarity
(Blue wire)
NEGATIVE POSITIVE
14 Allow Panic Mode OFF ON
15 Horn or Siren output
(White/Red wire)
HORN SIREN
25 Restore all options to PRE
SET VALUES
YES