Filter
Top Products
Advanced System Functions
The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local
authorized Firstech dealer to be active.
Tap the Function button once followed by the Lock button to turn the Drive Lock on and off. (also known as ignition controlled
door locks) The remote will beep once, “DRIVE LOCK ON” will scroll across the screen, and the icon will illuminate to confirm that
drive lock mode is activated. The remote will beep twice, “DRIVE LOCK OFF” will scroll across the screen, and the drive lock icon will
disappear to confirm drive lock is off.
IMPORTANT: Drive lock mode requires the dealer turn on Option 1-9. Drive lock has two settings;
Default 1: Off
Option 2: Locks the doors when the ignition is on and after the brake is depressed.
Option 3: locks the doors when the RPM’s have reached two times that of idle speed (this setting requires that a tachometer wire is connected).
With both settings, the doors will unlock when the ignition is turned off. If using this feature on a manual transmission vehicle, the doors will unlock
upon setting the emergency / parking brake.
Drive Lock / lgnition Controlled Door Locks
The built in turbo timer keeps the vehicle’s engine running for either 1, 2, or 4 minutes (programmable from dealer) after the vehicle key
has been removed from the ignition. This feature will keep oil running through the turbo system to allow for appropriate cooling time.
Tap the Function button once followed by the Unlock button to turn turbo mode on or off. The remote will beep once, “TURBO
TIMER ON” will scroll across the screen, and the turbo icon inside the motor icon will illuminate to confirm that turbo mode is activated.
Repeat to turn turbo timer off. The remote will beep twice, “TURBO TIMER OFF” will scroll across the screen, and icon will disappear to confirm
turbo mode is off.
IMPORTANT: To utilize this feature, the emergency / parking brake wire must be connected to the Firstech system. Consult your local authorized
dealer for installation.
Turbo Timer Mode
Advanced System Functions
The RPS is an optional feature. The car call/RPS feature uses a small sensor that is mounted on the inside of your windshield.
RPS Touch and RPS (Remote Paging Sensor)
!
!
!
!
Most 2 Way remotes have the ability to operate a 2nd vehicle. Tap the Function button twice then tap the Lock button to activate
this feature. The remote will beep once, “
2
ND CAR ON” will scroll across the screen, and the 2nd car icon will illuminate to confirm
that 2nd car mode is activated. The remote will beep twice, “
2
ND CAR OFF” will scroll across the screen, and the icon will disappear to
confirm 2nd car mode is off.
IMPORTANT: 2nd car mode requires the remote to be programmed to a 2nd vehicle that is equipped with the same system.
2
nd
Car Mode (Mulitiple Vehicle Control)
!
!
!
!
!
!
!
By Firstech, LLC 28 29 By Firstech, LLC
2W901R-SS_ES USER GUIDE.indd 29-30 2011-3-26 14:34:17