Filter
Top Products
Using Your Remote Vehicle Starter, continued
Operating the 2 / 3 Hour Start Up Timer Mode
The system has the ability to start the vehicle every 2 or 3 hours with a MAXIMUM of 6 start cycles. This
feature is especially useful in cold climates where the only means to keep the engine and engine fluids
warm is to periodically start the engine.
WARNING!
Be certain that the vehicle is outdoors before using this or any remote starting device. A running engine
produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs.
DO NOT remote start the vehicle if it is garaged.
Selecting between 2 and 3 hour start up: (default 3 hour)
Selection is made in option programming.
To begin the 2 / 3 hour start up timer mode:
1. Activate the remote vehicle start feature using the remote control.
2. As soon as the vehicle is running and the parking lights have turned on immediately press
the TRUNK button 2 times within 2 seconds.
3. Press the STAR button within 3 seconds.
4. Press the brake pedal to stop the vehicle from running.
To exit the 2 / 3 hour start up timer mode:
1. Turn the Ignition ON, the LED and parking lights will flash 4 times and the siren/horn will
chirp four times to indicate the system has exited start up mode.
OR
1. Activate the remote vehicle start feature using the remote control.
2. As soon as the vehicle is running and the parking lights have turned on immediately press
the TRUNK button then press and hold the STAR button for 2 seconds. The parking lights
will flash 4 times and the siren/horn will chirp for times indicating start up mode has exited.
Turbo Timer
To engage the Turbo Timer feature:
1. With the vehicle running via the ignition key and your foot off of the brake pedal.
2. Engage the vehicle’s parking brake and press the UNLOCK and STAR buttons simultaniously.
3. The vehicle’s parking lights will turn on to verify the Turbo Timer feature has been activated.
4. Turn the ignition key OFF, the vehicle will continue to run untill the pre-programmed time has
elapsed (1, 3, or 5 minutes)
To disengage the turbo timer feature:
1. Press the vehicle’s brake pedal.
Or
2. Turn the safety control switch to the OFF position (optional).
Remote Start Safety Features
For safety and security reasons, the system will shutdown or prevent the remote vehicle starter from
activating if any of the following occur:
1. The vehicle hood is open.
2. The brake pedal is pressed prior to turning the ignition key to the ON position.
3. The engine is over-reved (tach checking only).
4. The safety control switch is turned to the OFF position (optional).
6