Filter
Top Products
Emergency Override Procedure
If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the
security system off. There are two types of emergency override procedures. Check with your installing
dealer to find out what has been activated on your system.
Standard Emergency Override Procedure
1. Enter the vehicle, the security system will trigger.
2. Turn the ignition key to the ON position.
3. Press and release the emergency override button. The security system will turn off.
Note: If the automatic arming feature is enabled on your system. The security system will re-arm the next
time the ignition key is turn off and the vehicle’s doors are closed.
Coded Override Procedure
The system has an optional override mode that allows you to program a 2-digit personal code using the
emergency override button offering a higher level of security. This feature must be enabled by your
installing dealer. (see install manual for pin code programming)
1. Enter the vehicle, the security system will trigger.
2. Turn the ignition switch to the ON position.
3. Within 5 seconds press the emergency override button the number of times
corresponding to the first digit of your personal code. If correctly entered the
systems siren/horn will stop.
4. Within 15 seconds turn the ignition key OFF, then ON.
5. Within 15 seconds press the emergency override button the number of times
corresponding to the second digit of your personal code.
6. Within 5 seconds turn the ignition key OFF.
7. If entered correctly the security system will chirp 4 times and the parking lights will
flash 3 times to indicate the system has been disarmed.
NOTE: You must override the system within 60 seconds or the system will automatically re-arm
11