Filter
Top Products
Using Your Remote Control
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remote
control. The system will sound once and the parking lights will flash once, indicating the system is
armed. The doors will also lock at this time (if equipped and connected). The status indicator (red
warning light on the dash) will blink steadily, once per second. To arm the system silently, press the
LOCK and UNLOCK icon buttons for 1 second. The parking lights will flash 1 time, indicating the
system is armed, has locked the doors (if equipped and connected) and activated the starter disable
feature. The status indicator (red warning light on the dash) will blink steadily, once per second.
Passive Arming Bypass
If passive arming is enabled on your system, while the system is disarmed, Press the TRUNK button
twice, the system will respond with [1] chirp and the LED will turn “ON”. The security system will remain
in this temporally by-passed state for as long as you wish. To exit passive by-pass, press the
transmitter LOCK or UNLOCK button and the system will return to normal status.
Hidden Alarm Function
Press the TRUNK button first, within 3 seconds press the LOCK button to activate the hidden alarm
function. The security system will arm and with “Hidden Alarm Function”. The siren / horn will be
silenced even if the system is triggered while in the armed status but the 2-way remote will respond.
Disarming the Security System
To disarm the system press the UNLOCK icon button. The system will sound twice and the parking
lights will flash twice, and the doors will unlock (if equipped and connected). To disarm the system
silently, press the LOCK and UNLOCK icon buttons for 1 second. The parking lights will flash,
indicating the system is disarmed and has unlocked the doors (if equipped and connected).
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the UNLOCK icon button one time on the remote
control will unlock only the driver’s door. Press UNLOCK again within three seconds to unlock the
remaining doors.
Automatic Re-Arm
If this feature is enabled on your system, the security system will automatically re-arm itself 60 seconds
after disarming with remote transmitter. The Automatic Re-Arm feature will cancel if any door is opened
before the 60 second timer has elapsed.
Valet Mode
To engage valet mode:
1. Turn the ignition key to the ON position.
2. Press and hold the emergency override button.
3. The red dashboard mounted LED will light solid indicating that the system is in valet mode.
When valet mode is activated the dash mounted status LED will light solid, and all security functions
will be disabled.
To disengage valet Mode:
1. Turn the ignition key to the ON position.
2. Press and release the emergency override button.
3. The red dashboard mounted LED will turn off indicating that the system has exited valet
mode.
*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for
more than 2 seconds.
3