Filter
Top Products
Replacing Remote Control Batteries
The two (2) 3 volt lithium batteries (model CR2025) inside each remote control should last
approximately 1 year under normal use. When the batteries become weak you will notice the transmitter
range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the
remote control will dim. To replace the remote control batteries:
1. Using a small (#1) phillips screwdriver, remove the screw on the back of the remote control.
2. Gently unsnap the halves of the remote control apart.
3. Slide the 2 lithium batteries out of the circuit board, observing the +/- symbols on the batteries
and replace with new lithium 3 volt batteries (model CR2025).
4. Gently snap the halves of the remote control back together and reinstall the phillips screw on
the back of the remote control.
5. Test the operation of the remote control.
Emergency Override Procedure
If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the
starter disable feature off.
Emergency override procedure:
1. Enter the vehicle (the security system will trigger.
2. Turn the ignition key to the ON position.
3. Press and release the emergency override button (The security system will turn off).
Your Emergency Override Button is Located_____________________
8