Filter
Top Products
Using Your Remote Vehicle Starter
Remote Starting Your Vehicle
To activate the remote vehicle start function, press and release the OPT button on the remote control two (2)
times within 2 seconds. The vehicle’s horn will honk 1 time, the parking lights will flash 1 time and the
system will check the vehicle to ensure it is safe to start, if all safety parameters are correct, the vehicle will
start within 5 seconds (diesel vehicles will take longer). The vehicle’s parking lights will turn on (or flash
depending on system settings) as a visual indication that the vehicle has started and is running. Press and
release the OPT button on the remote control two (2) times within 2 seconds again to turn the remote
vehicle started off.
If your vehicle stalls or does not start
If your vehicle stalls or does not start, the Code Alarm CA-535 will pause 5 seconds, then try 3 more times
to start the vehicle (a total of four attempts). The system will pause 5 seconds between each start attempt. If
the vehicle does not start after the fourth attempt, the Code Alarm CA-535 will abort the remote vehicle start
process.
Entering the Vehicle While it is Running via Remote Vehicle Start
1. Unlock the vehicle’s doors.
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3. Insert the key into the ignition switch and turn to the ON or RUN position.
4. Press the brake pedal. The remote vehicle starter will disengage and the vehicle will operate normally.
Using the Safety (Red Handled) Control Switch
The safety (red handled) control switch allows you to temporarily disable the remote vehicle starter feature,
this is especially helpful when having your vehicle serviced or valet parked. To disable the unit, move the
safety (red handled) control switch to the OFF position.
Preheating or Precooling the Vehicle’s interior
Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the Code
Alarm CA-535 starts the vehicle, the heater or air conditioning will activate and heat or cool the vehicle’s
interior to your setting.
Turning on the Rear Window Defroster (if connected)
While the vehicle is running via remote vehicle start, press and hold the OPT button on the remote control
for 3 seconds. The rear window defroster will turn on for 10 minutes or the vehicles preset time limit.
Using the “Quick-stop” Feature
If you want to make a short stop and keep your vehicle running (to keep the interior warm or cool, for
instance), the quick-stop feature allows you to do this while keeping your vehicle secure and your keys with
you.
To engage quick stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off of the brake pedal, press and release the OPTION button on
the remote control two (2) times within 2 seconds. The parking lights will turn
on indicating the vehicle is now running via remote vehicle start.
3. Remove the keys from the ignition and exit the vehicle. Press the LOCK icon
button on the remote control to lock the vehicle’s doors if desired.
Note: Do not leave children or animals unattended in the vehicle when using the
quick-stop feature.
4