Filter
Top Products
Using the Optional Turbo Timer Feature
To engage the turbo timer feature:
1. With the vehicle running via the ignition key, and your foot off of the brake pedal.
2. Engage the vehicle’s parking brake.
3. The vehicle’s parking lights will turn on to verify the turbo timer feature has been activated.
4. Turn the ignition key OFF, the vehicle will continue to run for an additional 5 minutes.
To disengage the turbo timer feature:
1. Press the vehicle’s brake pedal
Or
2. Turn the safety (red handled) control switch to the OFF position.
Automatic Convenience Options
Illuminated Entry
When the system is UNLOCKED, the vehicle courtesy lights will turn on for 1 minute, or until the vehicle is
started or the system is re-locked.
Ignition Lock
If all doors are closed and the vehicle is started with the key, the doors will automatically lock. If vehicle
is started with vehicle doors open, the doors will not lock and will remain unlocked even after doors are
closed
Ignition Unlock
When removing the key from the ignition, the doors will automatically unlock.
Optional Songbird Feature
The optional songbird feature (Code Alarm part # SB1 and labor required) allows you to program songs
and tones to your system (i.e. Setting a different tone for Lock activation and unlock activation).
Turning Songbird On: Press and release the TRUNK icon button on the remote control, then press and hold
the LOCK icon button on the remote control within 2 seconds. The SB1 speaker will give notification that
Songbird has be turned ON.
Turning Songbird Off: Press and release the TRUNK icon button on the remote control, then press and
hold the UNLOCK icon button on the remote control within 2 seconds. The SB1 speaker will give
notification that Songbird has be turned OFF.
Setting Songbird Tones: Press and release the TRUNK icon button on the remote control, then press
the OPT button on the remote control within 2 seconds. Press the LOCK icon button on the remote
control or UNLOCK icon button on the remote control to scroll through the different tones.
While in this mode the TRUNK icon button on the remote control will change the length or version of the
tone.
Press the OPT button on the remote control to select the desired tone and exit programming.
Please see your sales associate for details on Song Bird or any other Code Alarm accessory.
7